Some 16 million people work in the healthcare sector, doing the work that keeps the rest of us alive. Personal protective equipment (PPE), such as medical face masks, are critical in protecting healthcare personnel while they provide services like surgery and patient care. Manufacturers that construct medical face masks, to produce a safe and reliable product, depend upon the testing and requirements for materials specified in ASTM F2100-21: Standard Specification For Performance Of Materials Used In Medical Face Masks.
This specification ultimately provides for the classification of medical face mask material performance. Medical face mask materials are designated as one or more of the following performance classes: Level 1 barrier, Level 2 barrier, and Level 3 barrier.
The barrier performance classes of medical face mask materials are based on bacterial filtration efficiency, differential pressure, sub-micron particulate filtration efficiency, resistance to penetration by synthetic blood, and flammability. Users should refer to the ASTM F2100-21 document for testing procedures and other specific requirements.
Application of ASTM F2100-21
Covering the minimum performance requirements for materials, ASTM F2100-21 is intended for use by those constructing medical face masks.
This standard does not apply to regulated respiratory protection, nor does it cover medical face masks for all possible use situations. For example, as stated in the ASTM F2100-21 document, “the Centers for Disease Control and Prevention (CDC) specifically requires NIOSH respirators that are at least 95% efficient for tuberculosis exposure control.”
Changes to ASTM F2100-21
ASTM F2100-21 revises the previous edition of the same standard for medical face masks that was released in 2020. With this update, ASTM F2100-21 significantly expanded its list of referenced documents, including the addition of ISO/IEC 17025. This ties to the new Section 11, which is focused on conformity assessment and details the need for compliance with ASTM F3050 and for testing to be conducted by an ISO/IEC 17025-accredited laboratory.
The standard also now calls for the final, finished medical face mask to pass appropriate evaluations for surface contacting devices in accordance with ISO 10993.
Referenced Documents in the Standard for Medical Face Masks
Since ASTM F2100-21 addresses such an integral topic in assuring safety of healthcare professionals, those who make use of it might typically need to be aware of similar specifications including the following documents referenced in ASTM F2100-21:
- ASTM F1494-14: Standard Terminology Relating To Protective Clothing
- ASTM F1862-17: Standard Test Method For Resistance Of Medical Face Masks To Penetration By Synthetic Blood (Horizontal Projection Of Fixed Volume At A Known Velocity)
- ASTM F2101-19: Standard Test Method For Evaluating The Bacterial Filtration Efficiency (BFE) Of Medical Face Mask Materials, Using A Biological Aerosol Of Staphylococcus Aureus
- ASTM F2299-03(2017): Standard Test Method For Determining The Initial Efficiency Of Materials Used In Medical Face Masks To Penetration By Particulates Using Latex Spheres
- ASTM F3050: Standard Guide For Conformity Assessment Of Personal Protective Clothing And Equipment
- ANSI/ASQC Z1.4-1993: Sampling Procedures And Tables For Inspection By Attributes
- ISO 2859-1:1999 – Sampling Procedures For Inspection By Attributes — Part 1: Sampling Schemes Indexed By Acceptance Quality Limit (AQL) For Lot-By-Lot Inspection
- ISO 10993-1:2018 – Biological Evaluation Of Medical Devices – Part 1: Evaluation And Testing Within A Risk Management Process
- ISO 10993-5:2009 – Biological Evaluation Of Medical Devices – Part 5: Tests For In Vitro Cytotoxicity
- ISO 10993-10:2010 – Biological Evaluation Of Medical Devices – Part 10: Tests For Irritation And Skin Sensitization
- ISO 10993-23:2021 – Biological Evaluation Of Medical Devices – Part 23: Tests For Irritation
- ISO/IEC 17025:2017 – General Requirements For The Competence Of Testing And Calibration Laboratories
- ISO/IEC TR 17026:2015 – Conformity Assessment – Example Of A Certification Scheme For Tangible Products
- BS EN 14683:2019 – Medical Face Masks. Requirements And Test Methods (British Standard)
- 16 CFR Part 1610 – Standard for the Flammability of Clothing Textiles
- 21 CFR Section 878.4040 Surgical Apparel
- 1910.1030 – Occupational Exposure to Bloodborne Pathogens
- 42 CFR Part 84 Respiratory Protective Devices
Many of these standards and ASTM F2100-21: Standard Specification For Performance Of Materials Used In Medical Face Masks are available on the ANSI Webstore. Those who want further requirements for face masks and PPE might be interested in ASTM F2100 / BS EN 149 / ANSI/ISEA Z87.1 / ANSI/ASSE Z88.2 – Medical Face Mask Collection or ASTM F2100 / ISO 374-5 / ISO 13688 / ISO 10993-1 – Medical Personal Protective Equipment Package.