Skip to content
  • ANSI Webstore
  • Accreditation
  • Training
Facebook Instagram YouTube Linkedin X Threads Pinterest Tumblr TikTok
The ANSI Blog
Search
  • Latest
  • ANSI Blog
  • ANAB Blog
  • Workcred Point of View
  • Customer Service
The ANSI Blog
Public address system before blue sky with five Infocomm horns
Acoustics and Sound | ANSI

First InfoComm Standard Revision: Audio Coverage Uniformity in Listener Areas

ByBrad Kelechava July 31, 2017May 29, 2025

***Update: InfoComm International has changed its name to the Audiovisual and Integrated Experience Association. Therefore, this standard is now AVIXA A102.01:2017. InfoComm International, an ANSI-accredited…

Aircraft fuselage above runway that may follow SAE AMS 2249H for titanium
Aerospace and Aviation | Aerospace Engineering | ANSI | Metals and Mining

Chemical Check Analysis Limits for Titanium and Titanium Alloys

ByBrad Kelechava July 28, 2017May 29, 2025

Titanium practically sits on a pedestal when compared to other metals, an honor that it derives from having the highest tensile strength-to-density ratio of any…

Rotodynamic pumps that follow ANSI/HI 9.6.1-2017
ANSI | Piping

ANSI/HI 9.6.1-2017 – Rotodynamic Pumps Guideline for NPSH Margin

ByBrad Kelechava July 27, 2017May 29, 2025

Head—the height at which a pump can raise water up vertically through a discharge pipe or tube—is an important factor in determining the overall performance…

Man installs ceramic tile on floor while following ANSI TCNA guidelines.
ANSI | Ceramic Tile | Construction

Growth of the Ceramic Tile Industry

ByBrad Kelechava July 26, 2017May 29, 2025

Appreciating ceramic tile for its elegance and practicality is a custom held as far back as the ancient civilizations of the Egyptians and the Babylonians….

A rotodynamic pump that follows the requirements set in ANSI/HI 9.6.3
ANSI | Piping

ANSI/HI 9.6.3-2017 – Rotodynamic (Centrifugal and Vertical) Pumps – Guideline for Allowable Operating Region

ByBrad Kelechava July 25, 2017May 29, 2025

During the continuous operation of a rotodynamic pump, a kinetic machine in which energy is imparted to pumped fluid by the means of a rotating…

White potassium hydroxide flaxes complying with AWWA B511
ANSI | Wastewater Treatment

AWWA B511-2017 – Potassium Hydroxide

ByBrad Kelechava July 21, 2017May 29, 2025

Potassium hydroxide (KOH), produced electrolytically from potassium chloride (2KCl + 2H2O → 2KOH + Cl2↑ + H2↑), is water-soluble, hygroscopic, odorless, corrosive to metals, noncombustible,…

8 thumbs up silhouettes being held up to sunset sky to show ISO 26000 social responsibility
ANSI | Quality Management

Social Responsibility: Transparency, Safety, and Other Consumer Issues in ISO 26000

ByBrad Kelechava July 19, 2017May 29, 2025

Social responsibility and sustainable development have grown into key concerns for almost all organizations worldwide in response to the intricate systems that comprise and influence…

Oxy-Fuel Torch being used for CGA E-5-2017 cutting of rusty steel plate
ANSI | Welding

Oxy-Fuel Torch Standard For Heating, Welding, and Cutting

ByBrad Kelechava July 19, 2017May 29, 2025

A prevailing misconception asserts that oxygen is flammable. However, while being essential for combustion, oxygen is by no means an element that can erupt in…

Lineup of red and blue CGA P-20-2017 compressed gas cylinders
ANSI | Compressed Gas

CGA P-20-2017: Standard for Classification of Toxic Gas Mixtures – Fifth Edition

ByBrad Kelechava July 13, 2017May 29, 2025

They’re inherently dangerous and often alarmingly colorless, yet toxic gases and gas mixtures are found in close proximity to many people who could, from direct…

Page navigation

1 2 Next PageNext

About Us

The statements made in ANSI blogs are those of the authors and do not reflect the official policy or position of ANSI.

Powered by ANSI. Made for you. - © 2025 The ANSI Blog - Our Privacy Policy - Our Cookie Policy - Our Terms of Use - Do Not Sell My Personal Information Copyright The ANSI Blog. All rights reserved.

  • Latest
  • ANSI Blog
  • ANAB Blog
  • Workcred Point of View
  • Customer Service
Search