Calcium Oxide: From Ancient Warfare to Modern Industry

Calcium Oxide Applications

Calcium oxide, a common chemical compound that appears as a white crystalline solid at room temperature, is easily attainable through the thermal decomposition of limestone. This was how the material, also known as quicklime, was acquired for human use, after ancient peoples burned limestone in a kiln to take advantage of its structural properties.

The name quicklime is fitting in many ways, since the substance forms rapidly after heating limestone and reverts back to its original state if it remains exposed to air. Similarly, if calcium oxide is mixed with water, it becomes slaked lime, a viscous, slurry material that is highly suitable for mortar applications. However, in the early days of quicklime use, people were likely not aware of this application, as lime was used in the Egyptian pyramids only for plastering. However, millennia later, the Roman Empire extensively used lime-based mortars in its architecture. There is even lime in the Great Wall of China.

Calcium Oxide in Warfare

As time progressed, the peaceful use of quicklime remained, but the chemical found another application that satisfied a different goal. In the late BCE, there is evidence of armies in different regions hurling calcium oxide at their enemies. Generally thrown by hand at this time, it didn’t even matter if the vessel carrying the quicklime directly hit its target, since the powdery substance could spread rapidly through the force of the wind.

The calcium oxide wasn’t really a form of direct decimation, but a sort of advanced smokescreen that would significantly stun the opposing forces. Part of this was the overpowering of choking and even suffocation that the soldiers would endure upon exposure. Just as bad for continuing a battle was the effect that quicklime had on their eyes. Due to their high level of moisture, the eyes were drastically susceptible to the effects of calcium oxide, which would turn into slaked lime upon contact, and the resulting mortar material in the soldiers’ eyes would practically blind them.

Quicklime Warfare Weapon

During the Middle Ages, many armies took advantage of this weapon, using it against naval forces to supplement a victory. Carried by the speed and distance of a catapult, trebuchet, or some other kind of ballista, calcium oxide could easily affect every crewmember of a ship. This was detailed by Thirteenth Century writer Giles of Rome:

“there used to be a large number of pots filled with ground quicklime, which are to be thrown from aloft into the enemies’ ships. When the pots are thrown with force and shatter on impact, the powder rises in the air and enters the enemies’ eyes and irritates them so greatly that, nearly blinded, they cannot see. This situation is very dangerous in naval warfare because fighting men in such war see themselves threatened with death from every quarter. Wherefore, if the eyes of the fighting men in such a battle are so irritated by powdered lime that they cannot see, they can easily either be slain by their enemies or submerged in the water.”

Another dreadful maritime war application of calcium oxide might have been its inclusion in the secret recipe of Greek Fire, a mysterious substance that is still not entirely understood today. Greek Fire was an incendiary mixture used by Eastern Roman Emperors to face against naval power, and first appeared in the Seventh Century CE to depend Constantinople against an invading fleet. This material was basically liquid fire; it was hurled at enemies through siphons, burning on contact. As it was inextinguishable, the chemical fireball spread quickly, even continuing to burn on water (and it should sound familiar to Game of Thrones fans).

Calcium Oxide in Industry Today

Today, the primary uses of calcium oxide differ from much of its history in warfare and more closely resemble its original application. Like in the pyramids and the Great Wall, quicklime is still a strong component of different materials. Lime is a common chemical used in iron and steel manufacturing, acting as a flux in purifying steel in electric arc furnaces (EAF) and basic oxygen furnaces (BOF). In addition to removing impurities, calcium oxide reduces refractory wear and gunning, and can provide a foaming slag for long arc operation.

As for structural purposes, as stated in ASTM C5-18 – Standard Specification for Quicklime for Structural Purposes, “quicklime can never be used as such for structural purposes; it must always be slaked first.” Because the purity and quality of slaked lime is greatly dependent on how it is prepared from quicklime, it is essential that this process be done properly, with a speed that depends on the specific lime used. The resulting slaked lime is used for mortar, plaster, and cement in buildings and other structures.

Lime Cement ASTM

Calcium oxide (and calcium hydroxide) is also an important chemical for raising the pH of  potable water and wastewater during its treatment. However, there are different methods used to utilize quicklime during the different stages of water softening, neutralization, and stabilization, so it is important to adhere to the types of lime recommended by ASTM C1529-06A(2011) – Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses. In addition, the amount of quicklime added to water varies by country due to federal regulations. In the United States, the use quicklime and hydrated lime in the water supply service is standardized by AWWA B202-2019 – Quicklime And Hydrated Lime.

Quicklime is also an important chemical for interacting with soil. One aspect of this is agricultural lime, which is added to crops to provide nutrients and to control the pH so that the plants can easily absorb nutrients that are readily available in the soil. Another is soil stabilization, a process by which quicklime and hydrated lime are added to soils to render them suitable for load-bearing applications, such as highway construction. Guidance for quicklime soil stabilization is addressed in ASTM C977-18 – Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization.

Further standards on quicklime are available by searching the ANSI Webstore.

2 thoughts on “Calcium Oxide: From Ancient Warfare to Modern Industry
  1. To produce the pattern on the walls of the Israeli pavilion at the Venice Biennale 2017, the artist, Gal Weinstein used steel wool, bronze wool, glue and calcium oxide. Can you provide any information on the process he may have used? How would the calcium oxide react with the metals and glue? Would water need to be added to promote a reaction?
    Thanks for the fascinating information – love the historical info.

  2. Very Interesting! Every chemical compound has different property and structure which makes it important in any industry. It is necessary to maintain the quality of chemicals because a low-quality product will never serve its purpose.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.