ANSI A108/A118/A136.1:2019 – Installation of Ceramic Tile

Following ANSI A108/A118/A136.1:2019 to lay ceramic tile

Ceramic tile looks good. Of course it does—skilled professionals utilize the best knowledge so you see only the aesthetically-pleasing 3 billion square feet of ceramic tile installed annually in the US. However, numerous other materials comprise ceramic tile installation—portland cement mortar, dry-set or latex-portland cement mortar, organic adhesive, epoxy adhesive, chemical resistant water cleanable tile-setting and -grouting epoxy, and chemical resistant furan mortar and grout. And, as stated in ANSI A108/A118/A136.1:2019:

“The quality and cost of ceramic tile installations are influenced by the stability, permanence, and precision of installation of the backing or base material.”

Due to the significance of the substrate and the adhesive material, ceramic tile installation is a delicate task. With such an expanse of materials to work with, ANSI A108/A118/A136.1:2019 – American National Specifications For The Installation Of Ceramic Tile covers a range of installation guidelines.

In fact, this American National Standard is not one single entity, but a comprehensive collection of specifications. In general, it is broken up into two parts: Installation Standards (A108) and Material Specifications (A118 and A136.1).

In all, the ANSI A108/A118/A136.1:2019 document includes American National Standard specifications A108.01, .02, .1A, .1B, .1C, .4, .5, .6, .8, .9, .10, .11, .12, .13, .14, .15, .16, and .17, which define the installation of ceramic tile, as well as A118.1, .3, .4, .5, .6, .7, .8, .9, .10, .11, .12, .13, .15, and A136.1, which define test methods and physical properties for ceramic tile installation materials.

As a compilation of voluntary standards for installing ceramic tile, each can be referenced or included in the ceramic tile sections of tile specifications. Adhering to standards for ceramic tile published by the Tile Council of North America (TCNA), an ANSI-accredited standards developing organization, is crucial for those involved in the industry, as these guidelines are largely depended upon. For example, if ceramic tiles that do not conform to ANSI A137.1—meaning that they are irregular in size and thickness—specialized methods might be needed for installation, raising labor and material costs.

Installing ceramic tile and following ANSI

For the ease of the user, each specification is clearly detailed throughout the document. For further aid, the standard features numerous notes, such as the following in A108.01 General Requirements: Subsurfaces and Preparations by Other Trades:

CAUTION: Wood-based panels such as particle board, composite panels (veneer faces bonded to reconstituted wood cores), non-veneer panels (wafer board, oriented strand board, and other similar boards), lauan plywood, and softwood plywood expand and contract with changes in moisture content and are not recommended as backing materials for ceramic tile.”

Which Ceramic Tile Installation Specifications Were Revised?

Since each section in ANSI A108/A118/A136.1:2019 denotes a different specification, only certain parts of the overall document were revised for the 2019 revision. The following specifications were updated for the current edition:

A108.02 General Requirements: Materials, Environmental, and Workmanship

A108.15 Alternate Method: Installation of Paper-Faced Glass Mosaic Tile

A118.1 American National Standard Specifications for Dry-Set Cement Mortar

A118.4 American National Standard Specifications for Modified Dry-Set Cement Mortar

A118.6 American National Standard Specifications for Standard Cement Grouts for Tile Installation

A118.7 American National Standard Specifications for High Performance Cement Grouts for Tile Installation

A118.9 American National Standard Specifications for Test Methods and Specifications for Cementitious Backer Units

A118.15 American National Standard Specifications for Improved Modified Dry-Set Cement Mortar

The specific guidelines for all ceramic tile installation specifications are laid out in the ANSI A108/A118/A136.1:2019 standard document.

ANSI A108/A118/A136.1:2019 – American National Specifications For The Installation Of Ceramic Tile is available on the ANSI Webstore.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.